Frameless shower door neo angle

Description of a Frameless shower door neo angle installed.

Bathroom Designs

Deciding on the right bathroom tile design for your home will not be a simple matter when you start your remodeling project; deciding on a style however, is easier said than done but there is not point redecorating until the choice has been made. There are a variety of designs and options available that appeal to a number of differing tastes as well as range of budgets. The most popular styles; the harlequin tile design, marble and natural stone are also traditional but the more colorful tiles are also gaining acceptance.

If you don't know what the harlequin bathroom tile looks like; imagine a white tile that has smaller black diamond shapes in a grid like pattern imprinted on them and you have the harlequin style. Sometimes these tiles are available in other colors but the traditional black and white oblong tile is the most popular and effective.

My favorite is the black and white design as the effect it has is hard to match and always improves the look of a bathroom. If you use these tiles around a clean white Victorian style bath tub on four feet with chrome fittings you can imagine how striking this looks.

Although this gives a stunning effect, chrome is renowned for leaving fingerprints so may require daily cleaning. This is something particularly relevant if you have young children, so may not be the best style for you.

But it is the classic white tile with small black squares which is my favorite which has a much cleaner look and is normally available without having to place a special order. If you have a little more to spend you may want to consider marble in your bathroom tile design and although it is expensive it will provide an unparalleled look and feel which everyone will admire.

If cost is an option then there are ways in which you can have the best of both worlds by having the main design made up of a bathroom tile that is moderately priced. It is then just a matter of finding a design that will complement what you have already chosen to create a new pattern and then it doesn't matter if the new tiles cost more as you won't be using them as much.

No matter what design you choose you probably want to consider investing in a professional for installation. Of course you will save a great deal of money if you carry out the tiling yourself. If there are problems, it will waste time and if then you have to bring in a professional, it will cost considerably more to finish your bathroom remodeling project.

If you are interested in more tips, options, designs, videos and discounts visit http://hubpages.com/hub/bathroom-designs

Measuring For Curtains - The Complete "Do-it-Yourself" Guide

Measuring for and hanging curtains is straightforward in many situations and can be done by anyone competent in DIY (do-it-yourself).

However, there are some situations where it is advisable to employ an expert. These include:

• Bay windows


• Slot windows; very narrow, tall windows


• Windows without sufficient wall space above the window for a pole/track


• Windows without wall space or on either side


• Non-rectangular windows (e.g. circular, triangular,)

But for most situations you will be using either a curtain track or pole across a flat rectangular window. So there are only two measurements of importance. When measuring use a sturdy metal tape measure, have a spirit level handy to check whether poles, batten, floors etc are truly level. Use proper safe steps if you are working at height and for large windows have an assistant hold the other end of the tape. The old adage "measure twice and cut once" holds true!

Measuring curtain width

Start by measuring the width of the window horizontally across the recess occupied by the window & its frame. [Note the width of a window is not the width of the glazing.] Now add 20-30cm (8-12"), on each side since the track or pole should extend beyond each side of the window to enable the curtains to be drawn well back. A large window has more fabric in the curtain and so needs more space either side to pull back completely. If there is insufficient space on either side of the window you may have to adjust your design and it would be better to get some expert assistance.

You may find a pre-existing wooden batten above the window and this should similarly extend beyond the window aperture. If it does not you may consider replacing or extending the batten. If you are fitting a track then the batten will be useful, whereas if you are fitting a pole the batten can be an obstruction. When you buy a pole make sure that the pole length (distance between finials) is equal to or greater than the required width and ensure that you can cut the pole length down to the desired size.

Measuring curtain drop

Curtain drop is the distance between the top and bottom of the fabric in the finished curtain, and it depends on the style of curtain heading, positioning of the pole or track and the position of the bottom of the curtain. When installing a curtain pole aim to position it above the window so that the top of the curtain fabric is at least 10cm / 4inches above the top of the window recess.

• Curtain Poles with rings: As a rule the top of the curtain should be just below the rings so measure the drop from the bottom of the ring.


• Curtain pole with eyelet curtains: In this situation there are no curtain rings and the top of the curtain will be above the pole. Measure the drop from the top of the pole and add 3.5cm to aloe for the amount of curtain that will be above the pole.


• Curtain poles with tab top curtains measure drop from the top of the pole.

For all curtains you need to decide where the bottom will finish:

• Sill length: the curtain should finish 1cm above the sill (but note that this will let more light into the room).


• Below sill length; often curtains finish part way between the sill and a wall mounted radiator. Sometimes they hang over the radiator but this channels warm air up behind the curtain and so does not help keep the room warm. Decide where you want the fabric to end.


• Full length; the curtain finishes 1.5cm above the floor. This measurement needs precision because many floors are not absolutely level. Measure the drop from an installed pole or track in three places, the centre and to the left & right. Work with the smallest measurement but double check that the track or pole is level. If in doubt check the slope of the floor.


• Pooled; compared with full length curtains these usually have an extra 30cm /12 inches of fabric to pool onto the floor

Finally

Once you have width and drop give these figures to your curtain maker who will be able to calculate the quantity of fabric you will need and the cost of making up the curtains. You will also need to agree on the curtain heading and on the type of lining for your curtains. All this may seem hard work but you will end up with bespoke made to measure curtains that fit your window perfectly; something that factory made curtains rarely can achieve.

Bronia Suszczenia is co-founder and Creative Director of Art from the Start Ltd a firm of interior designers in Yorkshire England. She has also recently established Fabric Gallery and Interiors a retailer of quality curtain fabric and wallpaper in York England.

shower glass door

custom frameless shower door 3/8" and 1/2" clear tempered, glass to glass installation, clip sistem, no u channels, no header, no vinyl seals, this is a truly frameless enclosure

What is Emulsion Paint?

You started redecorating your house but you are not sure you have picked the right paint in order to obtain the best results in all the rooms of your house. Here are some tips regarding home painting using emulsion paint.

Even though paint is a very common material, the technology used for obtaining it is quite complicated. Paint usually consists of pigments and a binder (oil or water-based). That is why, long-term storage will cause the two constituents of the paint to separate in the can; when you want to reuse it, the contents of the can must be well stirred (except for the non-drip paints) to ensure that the pigments and the binder are uniformly mixed.

While some paints give different surface finishes, others are designed for particular jobs (primer, undercoat, anti-condensation, radiator-paint, fire-retardant, bituminous). This makes the selection of paint quite a difficult task without the help of an expert.

Modern emulsion paint is a mixture of two substances that do not mix. It is water-based and due to the vinyl or acrylic resins added, it becomes more hard-wearing than traditional emulsions. The paint becomes harder wearing as the shine increases; the painting specialists usually offer matte, eggshell, silk, satin and full gloss ranges.

Emulsion paints are normally used for walls and ceilings. There are three such types of emulsions: vinyl matt, vinyl satin (used on areas that can be washed or sponged) and vinyl silk emulsion specific to kitchens and bathrooms. There are also special water based types of emulsions created for woodwork which may be easy to apply, but are not as hard-wearing as oil-based paints.

Emulsion paints may contain certain substances like fillers, catalysts, stabilizers, emulsifiers, adhesion enhancers, flattens or texturizes which produce different results: thicken the film, support the structure of the emulsion paint or increase its volume. Also, they may contain a lot of additives to produce various properties like: antifreeze, foam control, bacterial growth control and pigment stability.

Furthermore, emulsion paint can be applied either as gas (aerosol) or as liquid. Generally, you will apply it by means of brushes, paint rollers and other instruments. Once it is applied, paint can be blended with other painted regions within a certain interval of time (known as "open time"). This interval can be extended by addition of white spirit or other glycols.

The Crowns Emulsion smell makes redecorating enjoyable; change your home using Crown's wide range of colors and ideas.

10mm Grey Frameless Glass Install - Stoke-on-Trent

Frameless Glass room divider install in Stoke-on-Trent. 10mm Grey Single Glazed.

Super Glass Picture Portfolio

www.superglassonline.com Custom Frameless Shower Doors by Super Glass

Correct Spacing When Laying Down Tile

Choosing the spacing between your tiles is an important part of tiling. You will want to have the correct size tile spacers before you start your project. Using tile spacers will help you stay straight with any pattern or design when you lay your tile.

Does size spacing matter?

The size of spacing between your tiles does matter. Choosing spacers for your tile spacing will help with the style and design. Using spacers also will help in getting your tile project correctly done. You will want to work out the tile spacing, before you start cutting or laying your tile. This is important to ensure that the tiles at the edge of the room or walls are not small pieces or fillers that will change the look of your design. If you choose not to use spacers and guess at the amount of space in-between each tile, this could throw off the whole room and your grout lines will not be even. You want to keep your tile in a grid; this will allow you to construct a symmetrical finish to your project.

The principle of using spacers is for your tile to be lined up straight. When choosing spacers the size of space will determine consistent width of your finished grout line. When you are looking for the different sizes of spacers the traditional sizes are 1/4", 1/2", 3/4", 1/8", 1/16". The most common spacers used tend to be ¼ or 3/8 inch. There is no rule to why these sizes are the most common used, however they tend to give most tile a nice proportional look after the grout is finished.

The size of the tile and the look you are going for will determine the size of tile spacers you will pick. There actually is not a specific rule to what size spacer you will be using. If you were to have a 10x10 tile you want to use the spacer that would fit best in your project for less cutting and also that will put your tile wall to wall or end to end.

Choosing the best spacer for your tile can be very easy if you know a few tips, for instance if you are tiling on an uneven floor that you are not going to fix before tiling you want to choose the smallest spacer for a small grout line this will help keep the maintenance up, your grout will stay put and you will not have to re grout as often.

Spacers come in different types and styles. The original spacer is a cross-like plastic tee you that you can find in any hardware store. You can also find round top spacer that has a tee on the bottom and a line or knob on the top for easy removal. All spacers are made of a washable and reusable material such as plastic. If you keep your spacers washed up they will last a very long time for your next tiling project.

When you are tiling ceramic tile, porcelain tile, travertine, marble, or Saltillo tile you want find the grout that best matches your tile. Grout comes in many different colors and brands. If you are looking for warmth on a bathroom floor and you are laying down a light porcelain tile you can choose a darker color grout. If you are using porcelain tile in a larger room you can pick a lighter color grout than what the tile color is and this will allow your room to have a large open look.

The purpose of tile grout is to close the space between the tiles so they bond tightly together. This also keeps water and other substances out of the cracks of the tile.

When you choose your spacer size you can use new modern styles you can choose a very large tile such as an 18x18 tile and use small grout line this will give your floor and house a contemporary look. If you are using small 4x4 tiles you can pick a larger grout line such as a 3/4 grout line these ideas are more edgy styles that you would not be used to seeing in past tiling.

When you make your final choice of tile spacer size, you should be aware that your tile and grout will need maintenance. You should wash and reseal your tile and grout once a year. You can use the brush on or spray sealer, allow time to dry before walking or laying items on your tile.

Correct spacing when laying down tile.

Choosing the spacing between your tiles is an important part of tiling you will want to have the correct size Tile spacers before you start your project. Using Tile spacers will help you stay straight with any pattern or design when you lay your tile.

Does size spacing matter?

The size of spacing between your tiles does matter. choosing spacers for your tile spacing will help with the style and design. Using spacers also will help in getting your tile project correctly done. You will want to work out the tile spacing, before you start cutting or laying your tile. This is important to ensure that the tiles at the edge of the room or walls are not small pieces or fillers that will change the look of your design. If you choose not to use spacer and guess at the amount of space in-between each tile this could throw off the whole room and your grout lines will not be even. You want to keep your tile a grid; this will allow you to construct a symmetrical finish to your project.

The principle of using spacers is for your tile to be lined up straight. When choosing spacers the size of space will determine consistent width of your finished grout line. When you are looking for the different sizes of spacers the traditional sizes are 1/4", 1/2", 3/4", 1/8", 1/16". The most common spacers used tend to be ¼ or 3/8 inch. There is no rule to why these sizes are the most common used, however they tend to give most tile a nice proportional look after the grout is finished.

The size of the tile and the look you are going for will determine the size of Tile spacers you will pick. There actually is not a specific rule to what size spacer you will be using. If you were to have a 10x10 tile you want to use the spacer that would fit best in your project for less cutting and also that will put your tile wall to wall or end to end.

Choosing the best spacer for your tile can be very easy if you know a few tips, for instance if you are tiling on an uneven floor that you are not going to fix before tiling you want to choose the smallest spacer for a small grout line this will help keep the maintenance up, your grout will stay put and you will not have to re grout as often.

Spacers come in different types and styles the original spacer is a cross like plastic tee you that you can find in any hardware store. You can also find round top spacer that has a tee on the bottom and a line or knob on the top for easy removal. All spacers are made of a washable and reusable material such as plastic. If you keep your spacers washed up they will last a very long time for your next tiling project.

When you are tiling ceramic tile, porcelain tile, travertine, marble, or Saltillo tile you want find the grout that best matches your tile. Grout comes in many different colors and brands. If you are looking for warmth on a bathroom floor and you are laying down a light porcelain tile you can choose a darker color grout. If you are using porcelain tile in a larger room you can pick a lighter color grout than what the tile color is and this will allow your room to have a large open environment.

The primary function of tile grout is to fill the space between tiles and bond them tightly together. This also keeps water and other substance out of the cracks of the tile.

When you choose your spacer size you can use new modern styles you can choose a very large tile such as an 18x18 tile and use small grout line this will give your floor and house a contemporary look. If you are using small 4x4 tiles you can pick a larger grout line such as a 3/4 grout line these ideas are more edgy styles that you would not be used to seeing in past tiling.

When you make your final choice of tile spacer size, you should be aware that your tile and grout will need maintenance. You should wash and reseal your tile and grout once a year. You can use the brush on or spray sealer, allow time to dry before walking or laying items on your tile.

Adilson Andrade
ACIS TILE OF FLORIDA, INC. has been servicing the South Florida region with the best services in Tile installation since 2000.
When you hire our services you can be certain that you will be hiring professionals who pay high attention to detail at affordable prices. Our references will simply dazzle you.
http://www.ceramicTileFlorida.com
561-756-4910

Granite Shield TV - Glass Shower Doors

Disgustingly dirty glass shower doors, cleaned up and sealed with Granite Shield

SOLD - 92 Silver Birch Avenue, Wasaga Beach - Real Estate

Immaculate all brick 4 bedroom home located on the desirable Silver Birch Avenue! Beautifully remodeled kitchen in November 2010 which includes new quality oak cupboards finished in a rich dark stain, spring closing drawers, marble backsplash, dark brown granite sink, dura ceramic floors, pot lights over sink and all new high-end stainless appliances. But why stop in the kitchen, they also completed all new "superior" 2 ¼ hardwood floors in upper living room and bedrooms, custom rod iron railings in entrance, frameless shower doors in baths, and earth tone paint selections. The home also includes a gas fireplace up and down, main floor master and laundry, fully finished basement, plus ALL NEW WINDOWS in 2009, a very positive renovation for homes in this neighbourhood. There is an 8ft x 12ft sunroom located off the kitchen patio doors, interlocking driveway, double garage with inside entry, and property is extremely well landscaped w/fully fenced back yard with lots of privacy.

Real Estate for sale 12850 E MERCER Lane Scottsdale, AZ

MLS#: 4702516, 4 Bedrooms, 2.50 Bathrooms, 2350 Square Feet 12850 E MERCER Lane Scottsdale, AZ Panoramic McDowell Mountain Views** Backs to Wash for Total Privacy! 2012 Complete Remodel**Fabulous Open Kitchen**Stunning New Cherry Cabinets w/GORGEOUS Highly Upgraded Granite** S/S Appliances w/ Convection Oven and Built in Frig** Exquisite Versailles Chiseled Edge Travertine Flooring**New Int&Ext Paint**All New Landscaping**Gorgeous New Tahoe Blue Pebble Pool w/ Heated Spa**Huge Grass Area** Master Bath w/ Slab Granite Counters, Vessel Sinks**2 New Gorgeous Travertine Showers w/ Frameless Shower Door in Master** New Lighting**FANS in ALL BEDROOMS**Cathedral CEILINGS** Huge 3 Car Garage **Just Installed 2012 New A/C Unit!! Master Suite on First Floor, Lives like a Single Level** Home Backs to Huge Open Wash Area for Total Privacy and Stunning Mountain Views! For more information contact Joanne Zelko Email: joannezelko@cox.net Phone: 4807032444

Alan Mendelson & Modern Bath & Kitchen Designs

Modern Bath and Kitchen Designs. 11688 Ventura Boulevard, Studio City. (818) 506-9966. Importer and wholesaler of vanities, Whirlpool tubs, frameless shower doors, garage doors, wood flooring, toilets, faucetts, mirrors. Modern Bath also wholesales to builders and condominium associations, and sells at discounted prices to the public.

Corner square frameless shower screen with hinged panel door

This is an example of a corner square glass frameless shower screen with hinged panel door. It uses 10mm clear toughened grade A safety glass. It has a height of 2000mm and comes in a variety of widths from 800mm wide to 1200mm wide. For more products by Young Shower Screens, visit our website. www.comfortinnovations.com.au